Flexijoint Big Rubber Tyre Chock

Flexijoint Rubber Tyre Chock prevents accidents and deaths to occur when precautionary step is taken to place it at the vehicle tyres when vehicle is temporary station in idle mode for goods loading / unloading purposes or simply because of vehicle break-down.



Flexijoint Big Rubber Tyre Chock offers additional safety precautions particularly when use on heavy vehicles such as trucks, trailers, lorries, buses, forced to park at ascending or descending roads and hand brakes are in faulty conditions. 

The molded rubber tyre chock curvy design increases holding and gripping capacity by allowing vehicle tires to roll on the chock face.

Big Rubber Tyre Chock is portable with handle Size : 330mm (L) x 260mm (H) x 295mm (W). Weight 12 Kgs.

Picture Taken : Side View



Big Rubber Tyre Chock market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. 

For further enquiry, please contact us at 
T: +6 03 79541136  M: +6 016 3111313  
F: +6 03 79808259  E: flexijoint.ims@gmail.com.

Read More

Flexijoint Aluminium Octagonal K Lite KT-304 Road Stud

Road studs are commonly known as highway studs or railways studs or highway markers.

Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes.






Features :-
~ ASTM D4280, EN1463-1, SIRIM 1719:2003 standard;
~ PMMA lens ensure highest reflectivity;
Reflectivity ( White Colour ):-
Entrance Angle ( βH , βv=0° ) ±15°  ±10°    ±5° 
Observation Angle α                   2°      1°    0.3°
EN1463-1 (mcd/lx)                   2.5     25     220
Sample 1 (mcd/lx)                    3.8     39     345
Sample 2 (mcd/lx)                    5.1     50     442
Sample 3 (mcd/lx)                    4.6     47     416

(White mcd/lux), (Oberservation Angle=0.2 degree):-

Test Point                                 20L     0.2deg    20R
ASTM D4280                          112      279       112
Sample 1                                 178      628       196
Sample 2                                 275      702       249
Sample 3                                 245      612       203

~ Lowest cost;
~ High load capacity;
~ Good adhesive ability;
~ Easy to install;

Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.

Aluminium octagonal shape K Lite KT-304 road stud with Double Amber reflector 127mm x 90mm x 23mm market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. 

For further enquiry, please contact us at 
T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com

Read More

Flexijoint Barrier Delineator

Barrier Delineator (Back View)

Barrier Delineator (Front View) 

Barrier Delineator is a safety product commonly used along the edge of roads and highways. Barrier Delineator is usually made with dip galvanized metal or Low Density Polyethylene (LDPE) that comes in few design shapes and colour and often includes reflective sheeting that enhances visibility by reflecting vehicles headlights. 

Advantages of LDPE a thermoplastic polymer is typically soft and flexible offers good impact resistance especially at low temperatures thus prevents the Barrier Delineator to break from vehicle crash impact. LDPE is resistance to common chemicals, acids and bases, alcohols, aldehydes and esters. It can also withstand basic sterilization techniques, including gamma radiation, ethylene oxide gas and disinfectants such as benzalkonium chloride and formaldehyde.

Flexijoint LDPE Barrier Delineator is 45 degree section curved - economical, optimum reliability, easy installation, durable, high impact resistance and equiped with High Intensity Prismatic (HIP) reflective sheeting.

Display shown :-
Flexijoint Yellow LDPE "Y" Barrier Delineator, 120 x 95 x 4 thick (mm) with Semi-HIP and Full-HIP section sheeting.

Flexijoint LDPE Barrier Delineator market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. 

For further enquiry, please contact us at 

T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  

E: flexijoint.ims@gmail.com

Read More

Flexijoint Retractable Safety Barrier Rod

Retractable Safety Barrier Rod

Retractable Safety Barrier Rod is versatile and portable offer solution to pedestrian and vehicular traffic control problems, suitable to restrict access to temporary hazards or work in progress areas like cleaning or construction sites.

Features:
Portable and lightweight. 
Suitable for indoor or outdoor use.
Yellow reflective enhances visibility at night or low lights area.

Retractable Safety Barrier Rod with inner ring 81mm diameter 1000mm (L) expandable to 2000mm. Retractable Safety Barrier Rod expandable  to 3000mm(L) also available.

Retractable Safety Barrier Rod market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. 

For further enquiry, please contact us at

 T: +6 03 79541136  M: +6 016 3111313  F: +6 03 79808259  E: flexijoint.ims@gmail.com.

Read More

Flexijoint Adjustable Parking Pole

Adjustable Parking Pole

Adjustable Square Parking Pole

Adjustable Parking Pole is flexible in its use as an upright post to control or direct road traffic out of a reserved parking area for particular event or function to be held. 

The upright pole can be lowered to be allowed as parking lot again when initial parking lots are fully occupied. 

It is easily removable as the pole's locking mechanism is on the base plates.

Features:
Easy to Install, Lasting powder coat paint, Excellent barrier on vehicles and people.

Adjustable Square Parking Pole 820mm(H) x 64mm(L) x 64mm(W) with square base 200mm x 200mm market and sale by Flexijoint Industrial Marketing & Services, Kuala Lumpur, Malaysia. For further enquiry, please contact us at T:  +6 03 79541136  M:  +6 016 3111313  F:  +6 03 79808259  E: flexijoint.ims@gmail.com

Read More